Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
Heavier pieces acceptable upon mutual agreement between buyer and seller.
Blocks are acceptable upon mutual agreement.
SEAL-CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS
Minimum Zinc Content 90%.
Free of skimming.
Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
Heavier pieces acceptable upon mutual agreement between buyer and seller.
SEAM-CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS
Minimum Zinc Content 92%.
Free of skimmings.
Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
Heavier pieces acceptable upon mutual agreement between buyer and seller.
SCORE-OLD SCRAP ZINC
Consists of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates.
Borings and turnings are not acceptable.
Material must not be excessively corroded or oxidized.
All foreign attachments and extraneous materials are deductible.
SCREEN-NEW ZINC CLIPPINGS
Shall consist of any new pure zinc sheets or stampings free from corrosion.
To contain no foreign material or attachments.
SCRIBE-CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP, AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS
To be clean, free of dirt, oil, glass, rubber, and trash.
To contain a maximum of 5% unmeltables such as free iron, copper, aluminum and other metals.
SHELF-PRIME ZINC DIE CAST DROSS
Shall consist of metal skimmed from the top of pot of molten zinc die cast metal.
Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion or oxidation.
Should be poured in molds or in small mounds weighing not over 75 pounds each.
Zinc shall be minimum of 85%.
BATTERY TRIMMINGS
Zinc content should be 99% minimum.
Should be in the form of bales/briquettes or packed loose in jumbo bags.
SCOPE-NEW PLATED ZINC DIE CAST SCRAP
Shall consist of new or unused clean, plated zinc based die castings, such as those of ZAMAC alloys, free from corrosion.
Could be in the form turnings or slabs.
ZINC ANODES
Shall consist of 99.9% Zinc with embedded steel bars.
NOTE: Sizes may vary from Small Slabs weighing 20 kgs. to Jumbo Blocks weighing upto 1500 kgs. Also mention the Lead, Iron, Aluminium and Cadmium content along with your offers for our information.
